Elmo T-200, Инструкция по эксплуатации

Страница: 17 / 78

Number Mark Name Function
Related
Page
Contrast
Button
To adjust the contrast of the
projector.
P.37
ECO button To set the ECO mode. P.38
Volume button
To increase the volume of the
built-in speaker.
P.32
Volume button
To decrease the volume of the
built-in speaker.
P.32
MUTE button To temporarily mute the sound. P.34
Preparing the remote control
1. A battery is pre-installed in the remote control at the time of shipment (with
insulation sheet).
Remove the insulation sheet before using the remote control for the first time.
1. Pull out the battery case.
2. Take out the old button
battery and put the new
button battery in the battery case
with the "+" side facing up.
3. Insert the battery case to the remote
control.
Use the button battery type CR2032 for the remote control.
When purchased
How to change the battery
N o t e
Insulation sheet
Remote control
(Back)
Battery case
Button battery