Elmo T-200, Инструкция по эксплуатации

Страница: 65 / 78

5 TROUBLESHOOTING
INDICATOR ICONS
During use of the projector, the following icons may appear at the bottom right of the
screen to warn you or indicate errors. When the icon appears, follow the instructions
described in the table below.
If the same icon still appears after following the above instructions, contact your
dealer.
Example of the warning indication
Icon Description
Solution
Temperature
warning
The internal temperature has
been increased.
This icon will be displayed for
10 seconds every 5 minutes.
Turn off the projector immediately
and allow the projector to cool
down for at least 30 minutes.
Make sure of the following and turn
on the projector:
- The ventilator is not blocked by
objects or in any way obstructed.
- The ventilator is not covered with
dust.
- The peripheral temperature is not
exceeding 35
.
LED
brightness
degradation
The brightness of the LED is
decreased.
It is the time to replace the
LED lamp. If you continue to
use the projector without
replacing the lamp, the
brightness will decrease
continuously.
This icon will be displayed
once after the projector is
turned on.
Contact your dealer for repair.
Warning icons