Elmo T-200, Инструкция по эксплуатации

Страница: 25 / 78

Please be careful of volume level when using headphones. Continuous
usage of the headphone at very high volume may cause hearing loss. In
order to protect hearing, please do not turn up the volume level too high.
Please increase volume gradually as sudden increases may harm
hearing.
Please do not add extra force to the projector when inserting headphones
as this may cause damage.
Please read this instructional manual before connecting headphones or
an external speaker before connecting to the projector.
Please lower the audio volume of the external speaker before turning on.
Output audio through the AUDIO terminal
1. Connect headphones or an external speaker to the projector
Plug in headphones(sold separately) or an external speaker(sold separately) to
the AUDIO output port of the projector.
Built-in speaker output will be stopped and audio will be output through
headphones or an external speaker.
2. Adjust audio volume of the headphone
Audio volume of headphone can be adjusted by volume settings shown after
pressing MENU button on the front panel or the remote control while the
headphone is inserted to the AUDIO output terminal of the projector.
Refer to CONTROLLING THE VOLUME (Page51) for details.
The volume of the headphone can be adjusted by pressing the volume buttons
on the remote control.
Refer to CONTROLLING THE VOLUME (remote control) (Page32) for details.
Headphone
(Sold separately)