manualshive.com logo in svg

Elliott Digger Derrick, Руководство по эксплуатации и техническому обслуживанию, Страница: 89 / 376

Поделиться
Скачать
Elliott Digger Derrick Скачать руководство пользователя страница 89

   

 

 

Optional Remote Control EEC-0039 

 

 

V1.1 

Remote Control (Optional) 

I.  Engine Speed Switch 

This momentary toggle switch is used to activate the change engine speed between 

“HIGH”

 Idle and 

“LOW” 

Idle. 

Joystick Labels 

 

J.  Boom Swing Joystick 

This joystick operates the boom rotation system.

 

1. 

Push forward-“CW”

 position to swing boom clockwise (right). 

2. 

Pull back-“CCW”

 position to swing boom counter clockwise (left). 

K.  Boom In/Out Joystick 

This joystick operates the boom telescoping system. 

1. 

Push forward -“OUT”

 position to extend boom. 

2. 

Pull back - “IN”

 position to retract boom.

 

L. Spare Joystick

 

M. Boom Up/Down Joystick

 

This joystick operates the boom lift cylinder. 

1. 

Push forward -“DOWN”

 position to lower the boom. 

2. 

Pull back - “IN”

 position to raise the boom. 

N. Winch Joystick 

This joystick operates the main winch.  

1. 

Push forward -“DOWN”

 position to pay out winch line or lower load. 

2. 

Pull back - “UP”

 position to reel in winch line or raise load. 

 

Содержание Digger Derrick

























































































































































































































































































































































































Отзывы:

Нет отзывов