Elliott Digger Derrick, Руководство по эксплуатации и техническому обслуживанию, Страница: 303 / 376

27
W450321A 09/12
5.7.1 Calibrating the Swing Direction
The swing sensor supplies data for either direction. For consistency, the swing should count upwards (0,
1, 2, 3, etc.) when rotating clockwise. The direction of the swing can be changed while using the Greer
Insight display.
1. While still in the “04 Swing Sensor” menu, and sensor zeroed, press the “Menu Up” button until
“Direction = +” is displayed.
2. Press the “Direction = +” button to toggle directions on the swing count.
5.7.2 Enabling the Swing Sensor
1. Enter the calibration menu and press “Menu Up” to display “04 Swing Sensor”.
2. Press the “04 Swing Sensor” button. If the swing sensor is connected, entering this menu will
automatically initialize the sensor.
3. Press the “Zero” button, to set the swing sensor to zero with the current boom location.
4. The swing sensor is now initialized with a zero point. This will allow the use of the Swing Alarms
and Work Area Alarms.