Elliott Digger Derrick, Руководство по эксплуатации и техническому обслуживанию, Страница: 357 / 376

www.hawe.de | 2015 10-2014-2.1 - D 7960 N - V60N 11
Order coding example:
V60N-110 RDYN-2-0-01/LSNR-350-A00/76- C 022
Table 13 Flange versions (output side)
Coding V60N
060 090/110 130
Flange Shaft
C 010 -- C 030 ISO 7653-1985 DIN ISO 14
C 011 C 021 C 031 SAE-A 2-hole J 744
82-2 ISO 3019-1 SAE-A J 744 (16-4 ISO 3019-1)
9T 16/32 DP
C 012 C 022 C 032 SAE-A 2-hole J 744
82-2 ISO 3019-1 SAE-A J 744 (16-4 ISO 3019-1) 1)
9T 16/32 DP 1)
C 013 -- -- SAE-A 2-hole J 744
82-2 ISO 3019-1 19-4 ISO 3019-1
11T 16/32 DP
C 014 C 024 C 034 SAE-B 2-hole J 744
101-2 ISO 3019-1 SAE-B J 744 (22-4 ISO 3019-1)
13T 16/32 DP
-- -- -- SAE-B 2-hole J 744
101-2 ISO 3019-1 SAE-BB J 744 (25-4 ISO 3019-1)
15T 12/24 DP
C 015 C 025 C 035 SAE-B 4-hole J 744
101-4 ISO 3019-1 SAE-B J 744 (22-4 ISO 3019-1)
13T 16/32 DP
-- C 027 C 037 SAE-C 2-hole J 744
127-2 ISO 3019-1 SAE-C J 744 (32-4 ISO 3019-1)
14T 12/24 DP
-- C 028 C 038 SAE-C 4-hole J 744
127-4 ISO 3019-1 SAE-C J 744 (32-4 ISO 3019-1)
14T 12/24 DP
Note
Pay attention to the maximum permissible drive torque, as the flange or shaft may be damaged otherwise.
Note
An additional support is to be provided for pump combinations.
Other versions on request.
1) ANSI B 92.1, FLAT ROOT SIDE FIT, spline width deviating from the standard, s = 2.357-0.03