Elliott Digger Derrick, Руководство по эксплуатации и техническому обслуживанию, Страница: 134 / 376

Required Inspections EEC-0050 V1.1
Required Inspections
H. Check Rotation bearing and gearbox mounting bolts for proper torque. See “Bolt
Torque” chart for appropriate torque values.
I. Check mounting bolts, except “huck-bolts” for proper torque. See “Bolt Torque”
chart for appropriate torque values.
J. Check all “huck-bolts” for damage and tightness.
K. Inspect all electrical wires and connections for wear, cuts, deterioration, etc.
Replace as required.
L. Check condition of extend and retract cables for wear or damage.
M. Re-shim the boom wear pads as required. Replace worn or damaged wear pads
as required.
N. Check boom angle and boom length indicators for accuracy throughout entire
operating range.
O. Check LMI system for inaccuracies. Perform this check by lifting load of know
weight and measuring boom angle and radius.