Elliott Digger Derrick, Руководство по эксплуатации и техническому обслуживанию, Страница: 266 / 376

20
W450320A 09/12
Cancel Alarm Button
The cancel alarm button is used to silence the audible alarm. Pressing this button once will cancel an
audible alarm from an: Overload, ATB Alarm, or Operator Programmable Alarm. The audible alarm
remains cancelled until the condition which caused the alarm has been resolved.
Reset Function Kick-Out
When rigging the machine, it may be necessary to place the boom in a position which could cause a
function kick-out. In this situation, it would be necessary to use the bypass (Cancel Alarm Button). In
order to move the boom, the button must be held down. If the button is released, the until will revert to
the alarm mode.
The cancel alarm button is also used to temporarily reset the function disconnect relay. Press and hold
the button for 5 seconds to reset the relay. A second beep is heard confirming the bypass.
When the condition which caused the alarm is no longer present, the function disconnect relay will reset
to the normal condition.
WARNING!!
WHEN THE FUNCTION DISCONNECT RELAY IS RESET BY MEANS OF THE CANCEL
ALARM BUTTON, THERE IS NO LONGER PROTECTION AGAINST THE CONDITION
THAT CAUSED THE FUNCTION KICK-OUT.