Elliott Digger Derrick, Руководство по эксплуатации и техническому обслуживанию, Страница: 104 / 376

Wedge Socket EEC-0053
V1.1
Wedge Socket
WARNINGS AND APPLICATION
INSTRUCTIONS
S-421T / US-422T
“TERMINATOR”
™
NOTE: Existing Crosby S-421 Wedge Sockets can be retrofitted with the New
Terminator Wedge.
http://catalog.thecrosbygroup.com/qc.htm
New QUIC CHECK
®
“Go” and “No-Go” features cast into wedge. The proper size wire rope is
determined when the following criteria are met: 1. The wire rope shall pass through the “Go” hole in the
wedge. 2. The wire rope shall NOT pass through the “No-Go” hole in the wedge.
Inspection/Maintenance Safety

Always inspect socket, wedge and pin before using.

Do not use part showing cracks.

Do not use modified or substitute parts.

Repair minor nicks or gouges to socket or pin by lightly grinding until surfaces are
smooth. Do not reduce original dimension more than 10%. Do not repair by welding.

Inspect permanent assemblies annually, or more often in severe operating
conditions.

Do not mix and match wedges or pins between models or sizes.

Always select the proper wedge and socket for the wire rope size.