115
Enabling and disabling
To enable or disable a key, a user, remote accessibility or remote disabling, follow the
instructions below:
1. Select the item on which you would like to operate by clicking on the circular
selection button. Only one item may be selected at a time.
2. Press the
ENABLE
or
DISABLE
button, as needed. The item selected will be
enabled or disabled according to the button pushed.
The status of the various parameters is updated in real time, so next to the name of the
parameter the enabled icon will appear or disappear,
according to the new status.
The enabling and disabling are memorised in the control panel.
The image in the example above illustrates that the user Franca was selected to be
disabled.
