Elkron IT500, Руководство пользователя

Страница: 113 / 176

113
Functions available

Enables . Makes it possible to enable users and keys. Enables accessibility and
disarming via remote. It is available only to the Master user.

Contacts . Makes it possible to insert, modify, and delete telephone numbers and e-
mail addresses found in the system. It is available only to the Master user.

Procedure to change the username and password . This makes it possible to
modify the usernames and passwords only for access to the Web Server. It is
available only to the Master user.
IMPORTANT : To access the Web Server, the credentials are unique and the same
for all users. The usernames and passwords defined here are used only to access
the Web Server, not to interact with the alarm system, which requires the user to log
in using the same code used with the keypads.

Clock . This changes the date and time memorized in the control panel. It is
available only to the Master user.

Event Log . This shows the list of activities carried out directly on the system or via
the Web Server. It is available to all users.

Input isolation . This makes it possible to isolate inputs or include them again. It is
available to all users. If none of the inputs associated with the user via the partitions
can be isolated, clicking on INPUTS ISOLATION will trigger a pop-up with the
message “No input can be isolated”.

Short cuts . This allows the user to configure and enable the short cuts (those that
appear in the BURGLAR ALARM section of the HOMEPAGE) and scenarios (that
appears in HOME AUTOMATION section in HOMEPAGE). It is available only to the
Master user.

Information. This shows the general technical information about the system. It is
available to all users.
The DELETE ALARM MEMORY key is available to all users.
Press this key to delete all the alarm signals of the control panel for the partitions to which
the user has access. This means that if a user can operate only on some partitions,
determined according to the numerical access code of the control panel, he will be capable
of cancelling only the input alarms that belong to those partitions, and not all of the alarms.
The lack of power supply signals are also deleted.
In any case, the button does not delete fault and tampering signals.
When the user presses the
DELETE ALARMS MEMORY , a pop-up appears to confirm if
the data has been deleted successfully or not.