Elko RF Touch-B, Руководство пользователя, Страница: 38 / 44

CONTROL / DETECTORS
The menu Detectors is used for the visualisation and switching of devices using detectors.
By touching the option Detectors
e v
(Fig. 1) you will display the list of names on the detector
menu that you have created (Fig. 2).
Main Menu / Detectors
Double state detectors (JA-81M - doors; JA-82M - windows) feature state visualisation:
Green – Off state Red - On state.
JA-81M and JA-82M detectors may be used in two ways:
Information regarding the state (On/Off ) - e.g. open window (without pairing with the
switching actuator)
Pairing with the multifunctional switching actuator (On/ Off ) - e.g. light switched on when
door opened. By touching the name of the detector you will display the name of the
switching devices with which the detector is paired. By pressing the name of the
switching device you will display the selection (Fig. 4):
On state (neutral):
Off state (alarm):
Switch off - switched off without delay.
Delayed run out – switches off after the time period set in the switching settings.
Switch on - switches on without delay.
Delayed onset – switches on after the time period set in the switching settings.
Confirm by pressing
OK
(Fig. 4).
Note: The time delay is set for the paired actuator.
Double State Detectors
Single state motion detectors JA-80P do not feature state visualization and they are designed for pairing with the multifunctio-
nal switching actuator. By touching the name of the detector you will display the name of the switching actuator with which the
detector is paired.
Note: The function of Delayed Switch Off is automatically allocated to the detector. The time delay is set for the paired actuator.
Single State Detectors
fig. 1 fi 1 fig. 1
fig. 2 fi 2 fig. 2
fig. 3 fi 3 fig. 3
fig. 4 fi 4 fig. 4
38