Elko RF Touch-B, Руководство пользователя, Страница: 20 / 44

Note: the attached actuator RFTI-10B can be used in two ways:
For temperature measurement (without pairing with a switching actuator)
When paired with the multifunction switching actuator it can switch heating equipment on the basis of the measured temperature.
fig. 2 fi 2 fig. 2
Note: Battery indication on the display (Fig. 1) informs of low battery in one of the temperature units. Press the battery to display the unit name. Use arrows
o switch between the name and the address of the unit (Fig. 2-3).
fig. 3 fi 3 fig. 3 fig. 1 fi 1 fig. 1
Serves to combine the RFTI-10B, RFTC-10/G or RFATV-1 temperature unit with the RFSA-61M or RFSA-61B or RFDAC-71B multifunction
actuator, where the temperature unit measures the current temperature and the multifunction actuator switches on the Temperature
regulation based on the measured temperature. The multifunction actuator switches based on the set temperatures in the RF Touch.
Programming / Temperature regulation / Assigned receivers / RFTI-10B, RFTC-10/G and RFATV-1/ Pair with...
Shows multifunction switching actuator, which is paired with a temperature actuator. By touching the name of the actuator you
can
remove a paired actuator.
Programming / Temperature regulation / Assigned receivers / RFTI-10B, RFTC-10/G and RFATV-1/ Paired with.... . . . .
SETUP
20