Elko RF Touch-B, Руководство пользователя, Страница: 33 / 44

E
N
fig. 1 fi 1 fig. 1
fig. 2 fi 2 fig. 2
fig. 3 fi 3 fig. 3
fig. 4 fi 4 fig. 4
fig. 5 fi 5 fig. 5
fig. 6 fi 6 fig. 6
Dimming Menu is for all the lights where you want to control the brightness (load R L, C - 250V). Touch- Dimming (Fig. 1)to
display a selection of names you created in menu (Fig. 2).
Red / Green LED indicates contact status:
green- On red -Off.
Main menu / Dimming
CONTROL / DIMMING
Touch the desired name to displays basic functions: switch on switch off . A short touch on the arrows / beside icon
Dimming will set the desired brightness (Fig. 3). Touch
OK
to confirm. In the case displayed icon - level has been set by
other controler (Fig. 4).
Further functions (Fig. 5) can be used only in combination with multifunctional dimming actuators - RFDA-71B and analog
actuator RFDAC-71B.
Smooth start - touch will start smooth start-up for preset time.
Smooth stop – touch will start smooth run down for preset time.
In the Setting you can set time for smooth start and smooth stop . Time can be set from 2s to 30 minutes . Touch the time inter-
val hours (or minutes) to indicate

the information you want to change (Fig. 6). Arrows / will set time. Confirm setting by
pressing
OK
.
Note: longer press of arrows will accelerate shifting of figures.
Dimming/Functions
33