Elko RF Touch-B, Руководство пользователя, Страница: 13 / 44

E
N
fig. 1 fi 1 fig. 1
fig. 4 fi 4 fig. 4 fig. 6 fi 6 fig. 6
fig. 7 fi 7 fig. 7
fig. 8 fi 8 fig. 8
Settings (Fig.7-8):
Date and Time
automatic
transition between
winter / summer
time (for time
Zone GTM +01:00)
Format settings
hours (12h / 24h
mode)
To save Settings
press
OK
.
Date and time
SETUP
Selection of required
Language - Figure 6.
Save setting by
pressing
OK
.
Language
The settings menu can be opened by touch in the upper
right corner screen on the symbol d by to
and insertion of
password (it´s setting from production – 1111) (fi g. 4-6),
which you can change everywhen.
Main Menu / Settings
When the RF Touch is switched on for the fi rst time, you will be automatically redirected to the display calib-
ration screen. Touch screen can be controlled by the light touch (of about0.5-1s) in the desired location. On the
screen (Fig. 1) then appears cross in each corner of the screen, which need to be pressed twice. This will calibrate
the device. The display then shows the RF logo icon
and then touch icon signalizing scanning of the actuators.
Initial setup
date
time (touch in the upper right corner of the display will switch between analog
- digital clocks (Figure 2 - Figure 3)
display at the bottom of the screen is customable, eg: heating mode, a often used device ...
Touch the clock area to enter the Main menu. If you want to get to the main menu from
sleep mode, you need to touch the screen anywhere.
Content of the main screen
fig. 2 fi 2 fig. 2
fig. 3 fi 3 fig. 3
fig. 2 fi 2 fig. 2
fig. 5 fi 5 fig. 5
13