Elko RF Touch-B, Руководство пользователя, Страница: 37 / 44

E
N
fig. 1 fi 1 fig. 1 fig. 3 fi 3 fig. 3
fig. 4 fi 4 fig. 4
fig. 5 fi 5 fig. 5
fig. 6 fi 6 fig. 6
CONTROL / BLINDS
Weekly program can adjust automatic weekly mode.
Touch Weekly program icon (Fig. 1), setup menu will appear. Touch-hour time interval (or minutes) to mark information you
want to change. Arrows / will set the time of switch On and switch Off .
Note: longer press of arrow is accelerate shift of figures.
Touch the Sun-Sat icon will activate the program on a given day of the week (Fig. 2). - active for the day, - disabled for the
day.
Confirmation of the selected program -
OK
. If you want to set additional blinds program to continue with programming.
Note: For one day you can create up to 5 blinds programs. Programs must not overleap (Fig. 5). Setting of program until midnight and over midnight - see page 37.
Daily / Weekly Overview shows the daily / weekly overview of switching programs.
To delete a program in the Daily overview (Fig. 3) indicate bar you want to delete (Fig. 4) at then press the bin icon to delete it.
If you not select any of programed bars and press bin icon , you will remove all schedules in the day.
Weekly overview (Figure 5-6) touch the bin icon to clear all programs.
Blinds / Weekly program
fig. 2 fi 2 fig. 2
fig. 7 fi 7 fig. 7
Note: Setting the Inversion func-
tion: touch
/ in the Weekly
programme to set the initial move-
ment of the roll-up blinds (Fig. 7).
37