Elko RF Touch-B, Руководство пользователя, Страница: 23 / 44

E
N
fig. 1 fi 1 fig. 1 fig. 2 fi 2 fig. 2 fig. 3 fi 3 fig. 3 fig. 4 fi 4 fig. 4 fig. 5 fi 5 fig. 5 fig. 6 fi 6 fig. 6 fig. 7 fi 7 fig. 7
Quick control is used for creating a group command, where one-touch control multiple actuators.
For each name of group command you can assign a combination of up to 20 different actors.
Note: Quick control can be set only when all actuators are programmed in different sections of switching, dimming and blind control.
In the Quick Menu control(Fig. 1)choose name from list for the group command (Fig.2).
Select Assign new (Fig. 3) it will show group of units (switching, dimming and blind control). Select the section you want to as-
sign for desired command name (Fig. 4). You can create a menu for your device names created in the desired section.
Select the name (Fig. 5) and further define the function (Fig. 6).
The unit will returns to display groups of units (switching, dimming and blind - fig.7), where you can continue with programming.
When you select assigned receiver (Fig. 8) you can go to the menu to remove (Fig. 10) or change the device name
Programming / Quick Control
fig. 8 fi 8 fig. 8 fig. 9 fi 9 fig. 9 fig. 10 fi 10 fig. 10
Note: The Remove function removes
a group command name from the
RF Touch unit memory. The actua-
tors will remain in the memory.
SETUP
23