Elko RF Touch-B, Руководство пользователя, Страница: 29 / 44

E
N
To edit the mode, first select the setting button (image 1) and then the applicable mode to be modified (image 2) - Standard,
Energy-saving, Party or Antifreeze mode.
The open window detection function (image 4) monitors a sharp drop in temperature in the event of an open window and closes
the thermo-valve to a preset period. You can choose 3 levels of open window detection sensitivity, or switch the function off.
- Low sensitivity - drop in temperature by over 1.2°C /min.
- Medium sensitivity - drop in temperature by over 0.8°C /min.
- High sensitivity - drop in temperature by over 0.4°C /min.
Window detection (image 5) - a green dot displays the ongoing stoppage of heating during the set time of inactivity if an open
window has been detected.
Status (image 5) - Status 0 means the thermo-valve is functioning correctly, during constant display of different value, contact
the manufacturer.
Inactive period (image 6) - here you set the period during which heating is shut off once an open window has been detected.
Temperature regulation / RFATV-1
CONTROL / TEMPERATURE REGULATION
fig. 1 fi 1 fig. 1
fig. 2 fi 2 fig. 2
fig. 3 fi 3 fig. 3
fig. 4 fi 4 fig. 4
fig. 5 fi 5 fig. 5
fig. 6 fi 6 fig. 6
Note: If there are more thermo-valves RFATV-1 in one installation and there are paired to one switching actuator through RF Touch unit, the RF Touch sends the
command “to turn off the heating ” after the desired temperature is recorded by all thermo-valves.
29