Elko RF Touch-B, Руководство пользователя, Страница: 30 / 44

fig. 1 fi 1 fig. 1
fig. 2 fi 2 fig. 2
fig. 3 fi 3 fig. 3
fig. 4 fi 4 fig. 4
fig. 5 fi 5 fig. 5
Switching menu is for all the devices you want to switch. Touch Switching (Fig. 1) displays the names of your choice created
in menu. Red / Green LED indicates contact status: green -ON, red switched - off.
Touch the desired name (Fig. 2) to show basic functions:
switch on switch off.
Main menu / Switching
CONTROL / SWITCHING
Press the Next functions button (Fig. 3) will show a selection of switching functions (Fig. 4). Other functions can be used only in
combination with multifunction switch actuators - RFSA-61B, RFSA-62B, RFSA-61M and RFSA-66M.
Impulse –first touch switch on, second one to switch off.
Button – It is on as long as long you are holding button .
Delayed switch on - touch will begin to count preset time, after which the actuator switch on.
Delayed switch off -touch will start to count preset time after which the actuator will switch off.
In the section Time settings all times for Delay on and Delay off can be set.
Time delay can be set in the range from 2 to 60 minutes. Touch-hour time interval (or minutes) to

indicate the information you
want then change it (Fig. 5) with Arrows / .
Note: longer press of arrows will accelerate shifting of figures. Confirm time setting by pressing
OK
.
Switching / Function
30