7
Caution:
Any modification of the Joystick, Panel Mount, or Handheld Controller
enclosures will destroy the NEMA 4 rating to that piece of equipment and will void the
warranty coverage.
OEM Interface Module - 7070
The OEM Interface Module is used in conjunction with either the
Elkhart Brass or customer supplied joystick, or OEM installed
switches. The OEM Interface Module may be configured to
handle switching power or ground. The Interface Module provides
the option of mounting a joystick or switches in the apparatus cab
to control all monitor functions, including oscillation. The OEM
Interface Module may be powered with 12 or 24 Volts.
MONITOR ACCESSORY
Position Feedback Display - 7051
All EXM monitors come with Absolute Position Feedback sensors.
These sensors provide constant feedback to the monitors’
processor even when the monitor is moved via manual override.
This information is then transmitted to the Position Feedback
Display.
EXM CAN Stow Module- 7095
The EXM CAN Stow Module provides electrical outputs to which
an OEM can connect to in order to enable/disable truck
operations based on whether an EXM monitor is stowed or not
stowed. This could be used, for example, for a truck that has an
aerial or other movable object that may hit the monitor if moved
when the monitor is not stowed. These outputs could also be used
to turn OEM-supplied indicator lights on or off depending on the
monitor stow state.
External RF Antenna Module - 7062
The External RF Antenna Module can be utilized with an RF
equipped 7070 OEM Interface Module. The 10ft. extension harness
allows the antenna to be mounted in a position with a better line
of sight to the monitor. Use of the external RF antenna module is
required for aerial applications. The external antenna should also
be used with the OEM interface module when RF interference is
likely.
RF Transceiver Module - 7061
The RF Transceiver Module can be used with any input controller
to enable RF communication within the EXM system.
