6
CONTROL
Joystick Controller - 7030
The Joystick Controller must be used in conjunction with the 7070
OEM Interface Module (Joystick and OEM Interface Module can
be ordered together as the 7035 package). The Joystick
Controller can be mounted inside the apparatus cab to control
all monitor functions, including oscillation. The monitor direction
(both vertical and horizontal movement) is changed by moving
the joystick in the desired direction of travel. The up-down and
left-right motions can be operated simultaneously with pressure
sensitive speed, moving the monitor faster or slower depending
on how far the joystick is pushed and pulled. The water valve can
be opened with a trigger switch located on the front of the
joystick or can be locked into position through the use of the valve
buttons on the joystick. Nozzle pattern can be changed using the
thumb wheel on the top of the joystick. Oscillation is programmed
by using the joystick in conjunction with the oscillate button.
Panel Mount Controller – 7010
The Panel Mount Controller is a sealed controller for operation of
the monitor, nozzle, and water valve (optional). Separate push
button switches are provided for up, down, left, right, fog and
straight stream, valve open, valve close, valve preset, oscillation,
and auxiliary functions. The Panel Mount may be powered with 12
or 24 Volts.
Handheld Controller with Docking Station– 7015
When paired with battery pack, docking station, and RF
transceiver module, the Panel Mount Controller becomes a
Handheld Controller. The Handheld Controller is a sealed remote
control that contains all the controls necessary for operation of
the monitor, nozzle, and water valve (optional). The handheld
wireless remote allows the operator to control the monitor from a
significantly improved point of view, allowing the operator to
confirm that they are hitting the desired target. Separate push
buttons are provided for up, down, left, right, fog and straight
stream, valve open, valve close, valve preset, oscillation, and
auxiliary functions. The handheld remote, through the use of
frequency hopping techniques, allows multiple transmitters to
operate on a common site without interference. The remote also
has an automatic power down feature that will shut down the
power after 5 minutes of no activity. As an additional power
saving feature, the radio signal is only transmitted while buttons
are pushed. The handheld remote case has a NEMA 4 rating. The
Handheld may be powered with 12 or 24 Volts.
