Elkay Manufacturing Company
6
Installation Manual (2000000028 Rev B - 12/21)
5. Installation
5.1 What`s in the Box
CAUTION
Wear protective
cut-resistant gloves to
protect against sharp edges from sheet metal
components.
Use care when opening and removing the
packaging to prevent damage to the product.
1. Inspect the product for any shipping damage and
report it immediately to your dealer or lease provider.
Installation of a damaged product will void the
warranty.
2.
Confirm that all accessory parts have been included
for the proper installation of this product. Contact your
dealer or lease provider if damaged parts are found.
Note:
Accessories may vary in appearance from
image.
3. Remove the white magnetic key attached to the alcove
(this magnet is used to lock/unlock the dispenser
pouch lid), and peel away the protective cover on the
bottle decal before use.
4. Remove protective wrap from the cup rest grate, then
set the cup rest grate into the drip tray and place
complete drip tray assembly into position in the alcove.
Factory Supplied Parts
No
Description
Part Number
Qty.
1
Coil of 3/8” O.D. water tubing
10 feet (blue)
1000002708
1
2
Coil of insulation for 3/8” water tubing
(black)
101461040560
1
3
Coil of 1/4" O.D. CO
2
tubing (white)
1000002706
1
4
Quick connect CO
2
regulator
1000002468
1
5
Quarter-turn water supply shut-off valve 1000002470
1
6
Filter
51299C
1
7
Power Cord
1000004819
1
8
Ethernet Cable (15 feet)
1000005025
1
9
CO
2
Bottle Wall Mounting Bracket
1000005199
1
10
50 psi Water Pressure Regulator
1000002467
1
11
Filter Head Assembly
1000006192
1
-
Countertop Dispenser
SW1156CS
1
-
Smartwell Countertop Beverage
Dispenser Installation Instructions
2000000028
1
-
Pouch Tray
1000005882
1
-
Drip Tray
1000005969
1
-
Cup Rest
1000005960
1
-
Magnetic Key for Pouch Lid
-
1
5.2 Smartwell Cabinet (Optional)
Note: If you DO NOT own the optional
Smartwell
Cabinet, skip to section 5.3 - Connecting the Water
Inlet and CO
2
Tank.
1. Make sure the unit's main power switch on the back
of the unit is in the OFF position.
NOTICE
DO NOT plug the unit into a
power source at this time.
The ice bank must be filled with water before the
unit is turned ON and CO
2
cylinder installation
must be completed.
2. Unbox the Smartwell Cabinet, inspect to ensure no
shipping damage, then place upright on the floor in
desired location.
Lifting Hazard
Use two people to carefully lift the countertop
dispenser unit.
6
7
8
3
1
2
10
4
9
5
11