Elkay Manufacturing Company
8
Installation Manual (2000000028 Rev B - 12/21)
7. With the 1/4" tube, connect the CO
2
tank to the CO
2
inlet at the rear of the Countertop dispenser.
5.3 Connecting the Filter and CO
2
Tank
Note:
If you do not have the optional Countertop
Smartwell Cabinet, place the CO
2
tank in the
desired storage location. There is 10 ft of provided
tubing to connect the CO
2
tank, so keep this in
mind when planning the CO
2
tank storage location.
1. Make sure the unit's main power switch is in the OFF
position.
NOTICE
DO NOT plug the unit into a
power source at this time.
The ice bank must be filled with water before the
unit is turned ON.
2. Use a screwdriver to remove the 2 pan head screws
from the panel A of the Countertop unit.
3. Slide and remove the panel A from the Countertop
unit.
4. Use a screwdriver to remove the 4 pan head screws
from the panel B of the Countertop unit.
5. Remove panel B from the Countertop unit.
6. Preparing the water inlet line.
491a
7. Place the black insulation around the 3/8" blue water
tubing, leaving 4 inches bare to easily connect to the
dispenser.
Screw
Panel B
Panel A
Screw
Panel A
Panel B