Elkay Manufacturing Company
10
Installation Manual (2000000028 Rev B - 12/21)
13. Slide panel A into position and secure with 2 pan
head screws, tightening with screwdriver.
14. Installing the Filter.
a.
The filter can be conveniently installed on the back
of the Countertop dispenser unit using the included
two screws or can be installed in the desired under-
cabinet location.
Note:
The location where the filter is stored should
not exceed 100°F
.
.
15. Connecting the CO
2
tank to the unit.
a. Install and secure the CO
2
tank per the
manufacturer’s recommendations using the
supplied wall bracket, if appropriate.
b. Attach the supplied regulator valve onto the CO
2
tank.
c. Cut the supplied 1/4" poly tube to the appropriate
length.
d. Connect the 1/4" poly tube to the CO
2
inlet on the
back of the dispenser.
5.4 Internet
1. Connect an Ethernet cable from your network into
the back of the Countertop dispenser, or skip for
connecting via Wi-Fi.
2. Attach the power cord and plug directly into a wall
power outlet. Turn the main power switch ON.
Filter Head
Screw
Wall
Shut-off valve
Potable
water source
Filter
Pressure Regulator
Screw
Panel A
