Elkay Manufacturing Company
14
Installation Manual (2000000028 Rev B - 12/21)
c. Dispense a minimum of two gallons of still water to
purge trapped air from the internal water line and
the filter. This will also fill the water cartridge and
flush out fine carbon particles from the new filter.
d. Press the Sparkling Water button on the touch
screen and dispense about 15 ounces of water.
Wait about 30 seconds to allow the carbonator tank
to refill. Dispense another 15 ounces of water. Wait
another 30 seconds to allow the carbonator tank to
refill.
2. Slowly open the CO
2
tank regulator valve on top of the
CO
2
tank counterclockwise until it is fully opened.
OPEN
463b
3. Turn adjusting knob on the regulator until the pressure
reaches 45 psi.
OPEN
463d
6.4 Set the Water Flow Parameters
1.
There are two entries for the flow of water through
the dispenser in milliliters per second. This number
is based on the water pressure at the location of the
Smartwell unit. Test the water flow and then enter the
two numbers into the set up screen. The Still Water
default is 25, and the Sparkling Water default is 50.
a. From the Home screen, push the Wi-Fi signal icon
in the upper right corner of the screen to access
the Sign In screen. Enter 0101 and push the Sign
In button.
b. Elkay smartwell touchless screen will appear.
Accept the Terms and Conditions. Press submit.
c. Press the Set Up button on the admin screen and
the set up screen will appear.
1) Select the desired concentration of flavor in the
beverage: low, medium, or high. This setting is
based on user preferences and the default setting
is MEDIUM. If more flavor is desired, select the
HIGH setting.
