Installation Manual (2000000028 Rev B - 12/21)
13
Elkay Manufacturing Company
5.
Select the flavor or enhancement for each slot.
Choose the MM/DD/YY from the Best by date slot and
select the date. Press save.
6. Select the CO
2
slot and the Tank Capacity screen will
appear. Select either the 5, 10, 15, 20 lb. tank capacity
being installed.
7.
Press confirm once all slots and CO
2
are finalized.
8. The Priming screen will appear. Place a cup under the
nozzle to catch any liquid dispensed during priming.
9. When the Priming process is complete, the Home
screen will appear, and the unit is ready for use.
10. The Elkay Smartwell customer portal should now be
accessible if the unit is connected to the Internet.
Login and confirm the unit appears in the listing page.
11. Once complete, place the lid on top and slide back
until closed. Move the magnetic key into the lock
position, then remove the key and store in a secure
place.
1
1
2
222222
2
22
22222222222
3
6.3 Purging the Water Lines
1. Open the water supply valve and purge the trapped
air from the water line.
Note:
To flush out trapped air, allow water to run
continuously until the flow is free of air bubbles.
NOTICE
Water pressure that does
not meet the minimum
pressure requirement of 40 psi can cause
damage to the internal components. Low
pressure may also affect the performance of the
unit and the taste of the beverage.
a. Place a container under the dispenser nozzle.
b. Press the Still water button on the touch screen
and begin dispensing water.
Magnetic Key
Pouch lid
Countertop
Unit
