Elkay Manufacturing Company
4
Installation Manual (2000000028 Rev B - 12/21)
Never lay the cylinders on its side. Liquid CO
2
entering the gas regulator may cause problems
(rupture the tank or gas line) due to rapid expansion
of the liquid CO
2
. The gas regulator could freeze up,
preventing the regulator from shutting down, allowing CO
2
to
continue to flow from the cylinder.
Gas cylinders must only be transported on an open back
utility truck that is separate from the main body of the vehicle.
DO NOT transport CO
2
tanks in the passenger compartment of
a vehicle.
CAUTION
These cautions indicate a
potentially hazardous situation
which, if not avoided, may result
in minor or moderate injury. Follow all instructions related to
installation and/or maintenance of this product.
Personal Protection from CO
2
Gas
Follow all safety recommendations from the CO
2
tank
supplier, including but not limited to:
Indirect eye contact with CO
2
gas may cause mild
irritation. Direct eye contact with the liquefied gas
can freeze the eye causing permanent eye damage or
blindness.
CO
2
gas displaces oxygen. Make sure there are no
CO
2
gas leaks in any part of the Smartwell beverage
system.
Direct contact with the liquefied gas can chill or
freeze the skin (frostbite).
Tripping Hazard
Personal injury can result from tripping over power cords,
tools or other installation items. DO NOT leave items lying
around the work area.
Use Proper Tools
Always use proper tools which are in good working
condition during the installation of the product.
3. Key Components
Touch screen
Alcove
Pouch lid
Drip Tray
Nozzle
Countertop Front View
Countertop Rear View
Close View of Chiller Unit
Ice bank inlet
Chiller Power
On/Off Switch
Water Temp
Control
Overflow
Tube
Dispenser power
switch and circuit
breaker reset
Ethernet Cable Port
CO2 inlet
Water inlet
Chiller Unit
Main Power Unit
Lock for pouch lid
Note: Shown with back and side panels removed
