Installation Manual (2000000028 Rev B - 12/21)
11
Elkay Manufacturing Company
6. Startup Instructions
6.1 Initial Setup
1. Once the Countertop unit main power switch has
been flipped to ON, a loading screen followed by the
Welcome screen will appear.
2. Select either Wi-Fi or Ethernet connection and press
continue.
a. If Wi-Fi connection is selected, then the Wi-Fi
screen will open. Follow the screen prompts to
complete the setup. Push the back button at the
bottom left corner to continue the Initial setup
process.
b. If connecting the unit with an Ethernet cable directly
to your network, select Ethernet connection.
3. Test connection and check for updates.
— The left-hand screen will appear if the unit is not
connected to the Internet.
— The right-hand screen will appear if the unit
is connected to the Internet. Press Update to
continue.
Note:
If there is any issue with connecting after
setup, then try again to connect the Wi-Fi in the Wi-Fi
screen.
4. The unit will search for system updates. If there is an
update, it will be automatically installed.
5. Depending on whether or not the unit is connected to
the Internet, one of the following screens will appear.
— The left-hand screen will appear if the unit is not
connected to the Internet. Select the appropriate
date and time zone settings, then press Save.
— The right-hand screen will appear if the unit is
connected to the Internet. Select the appropriate
time zone settings, then press Save.
