Ness
-M1XEP Installation Manual
Page 20
12. Click the 'Outputs' button to display the following screen. A scroll box allows outputs 1 through 32, with the
"Show" option enabled, to be viewed with command options to turn them Off or On. To view and control outputs 33
through 208, check the 'Show Outputs >32' box located at the bottom of the outputs screen. The 'for' check box
allows a timer to be set, which controls how long the output will stay on. The 'Send' button must be clicked to
perform the desired command. Outputs printed in Red type are currently On.
11. Click the 'Tasks' button to display the following screen. This screen populates itself with the names of any
tasks that have been programmed in the Control with a name and the “Show” option enabled. A task can be
activated by clicking the green button beside of the task. If there are too many tasks to fit on one screen, the
word 'Next>' will illuminate along the bottom of the screen. Click 'Next>' to see additional tasks or '<Prev' to go
back to the previous group of tasks.
