English
63
11.4.3.6
Setting cutter plate
• Place the machine on an even, paved surface (e.g. concrete or asphalt, etc.).
• Turn off the engine.
• Partially loosen the 2 skid shoes by undoing the 2 M8 bolts per shoe.
• The 7 M8 bolts on the blade under the cutter head must then also be undone (not fully).
• Turn the ignition on without starting the engine. This enables the position of the cutter
head to be controlled.
• Lower the cutter head until a space of 5mm has been reached on both sides between the
frame of the cutter head and the ground.
• Lock this position by pushing both skid shoes onto the ground and then securing with the
M8 bolts.
• The blade is then positioned so that there is a margin of 2mm; the blade is then secured
with the M8 bolts.
For your information:
It may be handy to secure the outer bolts first and then set the cutter head to its
highest position before securing the other bolts.
M8 nut
Skid shoe
Knife
M8 nut
(slm13
