1
English
54
11.4.3.2
General lubrication treatment
ELIET is committed to using high-quality materials that extend a machine’s life cycle despite
the sometimes extreme work circumstances in which snow clearers are used. For this reason,
special lubrication products have already been applied in the factory. ELIET also recom-
mends lubricating all parts on a regular basis:
•
Bearings
•
Hinges
•
Friction areas
Caution:
As applies to all maintenance work, the engine must be turned off here as well.
Remove the key from the ignition.
A.
Lubrication via lubrication nipples
1. Cutter bearings
Follow this procedure:
• Clean the lubrication nipple.
• Spray on new grease in the lubricating nipple using an altered grease dispensing lever.
• ELIET recommends Sunoco Multi Purpose Grease.
• One or two pump-fulls will suffice to redistribute the new grease.
• Remove the grease that protrudes via the seams.
