Shenzhen Elephant Robotics Technology Co., Ltd.
35
Option 2 ‒ Teach
pendant Cable
Robot body - teach
pendant
4m
Connect the robot body and
the teach pendant.
The AC power cord is used to connect an AC 220V power outlet to a power
box. The power cable is connected to the power box and the robot body. If the
user does not purchase the teach pendant, there is also an emergency stop box
cable that needs to be connected to the robot body; If the user has a teach
pendant, connect the teach pendant cable to the robot body at the same
interface position of the emergency stop cable connector.
The original cable must be used.
The cable interface is generally easy to be damaged. Do not use brute
force or vigorously shake when plugging or unplugging. It is easy to cause
the interface to be loose or deformed. Please insert and remove it
carefully after alignment.
Be sure to replace the power supply box and related equipment after
removing the power supply and unplugging the power supply. If the
work is performed while the power is on, it may cause electric shock or
malfunction.
Be sure to connect the AC power cable to the power plug and not
directly to the factory power source. Turn off the power to the robot
system by unplugging the power cord. It is extremely dangerous to work
when the AC power cable is connected to the factory power supply,
which may result in electric shock and malfunction of the robot system.
Be careful not to bend the cable forcibly to avoid applying a load to the
cable. Also, do not place heavy objects on the cable and forcibly bend or
pull the cable. Failure to do so may result in damage to the cable,
disconnection, or poor contact, resulting in electric shock or improper
system operation.
Before wiring, turn off the power supply box and related equipment and
pull up the warning sign (for example, do not turn on the power). Wiring
in an energized state is extremely dangerous and may result in electric
shock and malfunction of the robot system.
Please ensure that the ground wire connection is reliable, otherwise it
may cause fire or electric shock.
3.6 System startup debugging
After the installation and connection work is completed, please plug in the
