© ElektroPhysik
QuintSonic 7
99 von 184
11.2.3.2
Delete a batch
Section 11.2.2.2 “How to delete a directory or a directory entry”.
11.2.3.3
Move a batch
See section 11.2.2.3: “How to move a directory or a directory entry“.
11.2.3.4
Rename a batch
See section 11.2.2.4: “How to rename a directory or a directory entry“.
11.2.3.5
Choose a batch for measurement
Press function key “Main menu” and select “Database”.
Press OK to confirm.
The currently active batch and its matching parameter set are shown on
the status line.
Use arrow up/down keys to choose the requested batch and press OK
to confirm your selection.
Your selection has become active now. The batch properties of are
shown on a list.
If you do not wish to make any changes to the batch parameter
settings, you can directly proceed on measurement.
Place the senor on the measuring object.
The gauge switches automatically to measuring mode and the currently
reading is shown.
You may also press the OK key to switch to the measuring mode.