ElektroPhysik QuintSonic 7 Скачать руководство пользователя страница 128 | Manualshive

Страница: 128 / 184

ElektroPhysik QuintSonic 7 Скачать руководство пользователя страница 128

Setting Parameter Sets

© ElektroPhysik

QuintSonic 7

128 von 184

12.2.2.2.3 Variable clipping

This clipping method allows you to edit clipping limits, set or delete
domains and use the “invert” function.

Select the requested item from the menu and press OK to confirm.

Set clipping domains

Point of start is the A-scan image on the left. It has been created by

measurement of a 2-layer sample with the global clipping function being

enabled. No additional clipping domains have been defined so far. 3

layer interface echoes have been extracted with the first two echoes
representing “true” echoes while the third one has been extracted from
an interference.

Press Help/Extras to call the A-

scan image menu. Select “clipping

limits” followed by “Create”.

The A-scan image appears displaying a high-lighted doted area, the so-

called blocked domain. For the moment, this blocked domain reaches

in right direction from the cursor to the end of measuring range. It

moves  according  to  cursor  position.  Use  the  cursor  to  adjust  the
starting  times  (function  keys  “left”  and  “right”)  and  the  amplitude  limit
(“arrow up/down” keys) of the clipping domain to be created.

If the cursor is located above the zero line, the blocked domain will

range downwards and vice versa.

To create a clipping domain for the first echo, place the cursor behind

the second coupling echo. Make sure to adjust the amplitude limit so

that the first layer interface echo will clearly protrude. Press OK to

confirm.

«
...
126
127
128
129
130
...
»

Содержание QuintSonic 7

























































































































































































Отзывы:

Нет отзывов