ElektroPhysik QuintSonic 7 Скачать руководство пользователя страница 95

Страница: 95 / 184

Data Management

QuintSonic 7

95 von 184

11.2.2.3

How to move a directory or a directory entry

Use arrow up/down keys to select the directory or directory entry you

wish to move. Your selection will be greyed out.

Press function key “Actions”.

Select “Move” from the list and press OK to confirm.

Follow the pop-up window. The move procedure will be executed.

Note:

The target position must be an intermediate position, i.e. it must be

located between two entries or a the end of the tree. Such

intermediate position will be marked by an arrow on the left edge of

screen.

It may occur that during the move procedure a message will appear
“Memory optimisation in progress! Please wait…”. This is for internal
reasons only and not of any importance to the user.

The directory entry has been moved to the requested position.

Содержание QuintSonic 7

























































































































































































Результаты поиска

Содержание QuintSonic 7

Отзывы:

ElektroPhysik QuintSonic 7, Техническое руководство и инструкции по эксплуатации, Страница: 95 / 184

Результаты поиска

Содержание QuintSonic 7

Отзывы: