© EA Elektro-Automatik in 2022, this information is subject to change without notice
74
06230820_manual_psi_10000_3u_15kw_en_01
Diagrams:
Applications and results:
Sta
rt (D
C)
t
U,I
f (start)
f (end)
Seq.time
En
d (
DC
)
Example 4:
Focusing 1 cycle of 1 sequence point:
Similar to example 1 but with another end frequency. Here this is shown
as higher than the start frequency. This impacts the period of the sine
waves such that each new wave will be shorter over the total span of the
sequence time.
Sta
rt (D
C)
t
U,I
Seq.time
En
d (
DC
)
Example 5:
Focusing 1 cycle of 1 sequence point:
Similar to example 1 but with a start and end frequency of 0 Hz. Without a
frequency no sine wave part (AC) will be created and only the DC settings
will be effective. A ramp with a horizontal progression is generated.
Sta
rt (D
C)
t
U,I
Seq.time
En
d (
DC
)
Example 6:
Focusing 1 cycle of 1 sequence point:
Similar to example 1 but with a start and end frequency of 0 Hz. Without a
frequency no sine wave part (AC) will be created and only the DC settings
will be effective. Here start and end values are unequal and a steadily in-
creasing ramp is generated.
By linking together a number of differently configured sequence points, complex progressions can be created. Smart config
-
uration of the arbitrary generator can be used to match triangular, sine, rectangular or trapezoidal wave functions and thus,
e.g. a sequence of rectangular waves with differing amplitudes or duty cycles could be produced.
Assignment to either U or I makes up to 99 sequence points available for either current or voltage but not
a mix.
Diagrams:
Applications and results:
t
U,I
t
U,I
Example 7
Focusing 2 cycles of 1 sequence point:
A sequence point, configured as in example 3, is run.
Because the settings demand that the end offset
(DC) is higher than the start, the second cycle will
revert to the same start level as the first, regardless
of the values achieved at the end of the first run. This
can produce a discontinuity in the total progression
(marked in red) which may only be compensated
with careful choice of settings.
