ELEKTRA Crema Caffe, Инструкция по эксплуатации

Страница: 37 / 68

37
WARNING: WATER LEVEL CONTROL SYSTEM FAULT
(A-S-K-C-B)
If the following alert appears (A-K):
“WATER LEVEL CONTROL SYSTEM FAULT - MACHINE OFF - REPAIR”
or the following (S-C-B):
the fault could be due to:
- Water supply stoppage (except for A-K models with WTS): restore it.
- Fault in the boiler water inlet solenoid valve or obstruction to the passing of water
through some parts of the machine.
- Electrically isolating incrustations on the level probe or an interruption
in its electrical connection that prevents the presence of water in the boiler from
being detected: contact Technical Assistance.
WATER COMES OUT OF THE STEAM WAND (A-S-K-C-B)
This means that the boiler is completely full of water instead of containing a certain
quantity of steam.
The possible causes of this are:
- Fault in the boiler water inlet solenoid valve.
- Electrically isolating incrustation on the level probe or interruption in its electrical
connection.
Switch off the machine, turn off the water supply and contact Technical Assistance .
FLASHING OF THE PUSHBUTTON LED DURING DISPENSING (S-C-B)
If, after dispensing selected with an automatic button,
e.g. group 1 single short coffee, the following alert is displayed:
this means that the machine is not detecting the passing of the water.
The possible causes of this are:
- Coffee ground too finely: adjust it.
- Water supply stoppage: restore it.
- Fault or obstruction to the passing of water through some parts of the machine:
contact Technical Assistance.
4
5
3