ELEKTRA Crema Caffe, Инструкция по эксплуатации

Страница: 20 / 68

20
COFFEE BREWING DOSES PROGRAMMING (S-C-B)
In order to program the coffee brewing doses switch the machine on by pressing the button
marked with the symbol keeping contemporaneusly pressed both the “double long coffee”
button and the “manual coffee” button of group 1.
All the buttons are programmed making one or two sample coffees with the desired dose,
as per following procedure:
1 - The group 1 selection is displayed as shown below:
2 - Press the “ENTER” key to display the group 1 single short coffee selection as shown
below (pressing on the contrary the “+” key you select group 2 - see step 14;
if the machine has only one group you will remain at step 1):
3 - Press the “ENTER” key to display the group 1 single short coffee sample request
as shown below (pressing on the contrary the “+” key you select group 1 single long coffee
- see step 5):
4 - Make a sample coffee by pressing the group 1 single short coffee button. Press the
button again when the desired dose has been reached: the pushbutton led goes off,
the dose is stored and you pass automatically to the group 1 single long coffee selection.
5 - The group 1 single long coffee selection is displayed as follows:
6 - Press the “ENTER” key to display the group 1 single long coffee sample request
as shown below (pressing on the contrary the “+” key you select group 1 double short
coffees - see step 8):
7 - Make a sample coffee by pressing the group 1 single long coffee button. Press the button
again when the desired dose has been reached: the pushbutton led goes off, the dose is
stored and you pass automatically to the group 1 double short coffees selection menu.
8 - The group 1 double short coffees selection is displayed as follows:
GENERAL ADJUSTMENTS D
1