ELEKTRA Crema Caffe, Инструкция по эксплуатации

Страница: 42 / 68

42
19 NO SALT LOADING (A-K with WTS)
If “ENTER” is erroneously pressed before the salt is loaded in the water softener, do not try
to open the water softener. Proceed as follows:
1) Wait, while continuing to operate the machine: after approx. one hour, the following alert
will be displayed:
“WATER TREATMENT SYSTEM FAULT - MACHINE ON - REPAIR”,
as the machine expects it to be utilized correctly and when it detects the absence of salt
in the resin washing water, it diagnoses a fault.
2) Switch the machine off and then on again: the following alert will appear on the display:
“WATER TREATMENT CIRCUIT RINSE UNDER WAY - DURATION 60 MINUTES - MACHINE ON”.
Wait, while continuing to operate the machine.
3) Once the rinsing cycle has been completed, the following alert will appear on the display:
“LOAD SALT AND PRESS ENTER - MACHINE ON”:
at this stage, you have returned to the initial point of departure.
It will therefore be possible to carry out salt loading and confirmation of the same correctly.