8
Mechanical safety characteristics, hazards
• The appliance does not have sharp edges or protruding parts. The guards for the moving
and live parts are fixed to the cabinet with screws, to prevent accidental access.
CAUTION
In case of a significant anomaly (e. g. short circuits, wires coming out of the
terminal block, motor breakdowns, worn electrical cable sheathing, smell of gas
indicating possible leakage, etc.) the operator must:
immediately deactivate the machine.
A.5
Safety signs to be placed near the machine area
Prohibition
Meaning
Do not remove the safety devices
Do not use water to extinguish fires (placed on electrical
parts)
Keep the area around the appliance clear and free from
combustible materials. Do not keep flammable materials in
the vicinity of the appliance
Install the appliance in a well-ventilated place to avoid the
creation of dangerous mixtures of unburnt gases in the same
room
Danger
Meaning
Danger of burning – Hot surface
Danger of electrocution (shown on electrical parts with
indication of voltage)
End of use
• When the appliance is no longer to be used, make it unusable by removing the mains
power supply wiring.
A.6
Reasonably foreseeable improper use
Improper use is any use different from that specified in this manual. During machine operation,
other types of work or activities deemed improper and that in general can involve risks for the
safety of operators and damage to the appliance are not allowed. Reasonably foreseeable
improper use includes:
• lack of machine maintenance, cleaning and periodical checks;
• structural changes or modifications to the operating logic;
• tampering with the guards or safety devices;
CAUTION - HOT
ATTENTION - CHAUD
