Electrolux 603877, Инструкция по установке и эксплуатации

Страница: 31 / 46

31
CONNECTIVITY SETTING
1 2
This function allows to connect the appliance to the Service
remotely. The Service will be able to check any errors that
may arise in the appliance.
For this function, see the steps described in the
CONNEC-
TIVITY paragraph in J.4 Basic settings chapter.
CONNECTIVITY RESET CONNECTIVITY RESET
CONFIRM
J.6 Daily use
WARNING
Risk of burning. The glass and
the upper heating plate are hot.
1. Place the sandwich on the glass making sure that the
sandwich is fully under the upper heating plate.
2. Close firmly the lid.
3. Press one of the “8“ program buttons to set the required
cycle.
4. At the end of the program, you can hear an acoustic signal
and the lid is opening.
5. Remove the sandwich from the glass by the delivered
plastic spatula (ANC 653625).
NOTE!
To interrupt the cycle press the buttons “7“ and “8“
or open the lid within 9 seconds after the program
start.
To restart the appliance again close the lid and
select a program again.
CAUTION
• Pay attention when the lid is opening,
do not block the lid movement.
• Cooking surfaces are strong but not
unbreakable and can be damaged by
hard or sharp objects if falling on the
top with a certain force.
• Do NOT use the appliance in the event
of breaks, flaws or cracks.
CAUTION
As in any Microwave appliance, it can
occur to have sparks inside the cooking
chamber. These sparks do not influence
the safety of the user nor the appliance
nor the quality of the sandwich. If, as a
consequence of the sparking, a dark mark
on the metal parts is visible, this can be
cleaned with a damp cloth.
IMPORTANT
Risk of overcooking. The glass and the upper
heating plate are heating also when the lid is
opened. Do not leave the sandwich on the glass
long before and long after the cooking cycle.
CAUTION
Press the control panels buttons only with
the fingers.
K REMOVABLE TEFLON PLATE (RTP)
CAUTION
Carefully follow these instructions on
using the Removable Teflon Plate (RTP)
in order to ensure the proper operation
and service life of the appliance.
K.1 Removable Teflon Plate (RTP) use
The Removable Teflon Plate can be used on both sides. Each
side can be used up to about 2500 cooking cycles.
• To ensure durability, clean both sides every day because
the hidden side also gets dirty during use.
• We suggest a consecutive use of the same side, until 2500
cycles are reached, before starting to use the other side.
K.2 Replacement of Removable Teflon Plate
(RTP) on top heating plate
The RTP is fixed to the top heating plate by means of 4 clips.
To reach these clips, the upper heating plate has to be
removed. Proceed as described here below.
WARNING
The upper heating plate and the
glass can be hot, if in or directly
after use. Make sure to fix the
RTP only when the top heating
plate is cold. If not, use protective
gloves for high temperature use.
Be sure that the appliance is switched off.
1. Open the lid and put a glass saver “ A “ (e.g. cloth or high
temperature silicone pad).
2. Unlock the upper heating plate by pushing the locking nut
backwards B .
3x
UNIST. NIU?