Electrolux 603877, Инструкция по установке и эксплуатации

Страница: 23 / 46

23
Yellow triangle icon
• When the display shows the yellow triangle icon switch the
appliance OFF and ON.
• If the same icon shows up again on the display press
simultaneously the buttons “1“ and “2“ for 4 seconds until an
error code appears on the display. Inform the Service about
the indicated error.
NOTE!
Pressing simultaneously the buttons “1“ and “2“
activates the alarm LOG on the display.
Alarm events are recorded with date and time.
Press the arrows buttons to scroll all the alarms.
Once selected the required event, press
button
to display more information about the occurring
problem.
Red triangle icon
• When the appliance is used for too long it may overheats. In
this case the display shows a red triangle icon;
wait for the overheated appliance to cool down.
• In some cases after cooling the display shows the text
“Restart“; switch OFF and then ON the appliance.
Stand-by
• After a certain time of inactivity (the time out is adjustable),
the appliance switches automatically in stand-by status to
save energy. If it is necessary to put the appliance in
Standby before the time out press simultaneously the
buttons “5“ and “6“.
NOTE!
It is possible that the buttons show dashes instead
of numbers, in this case press the corresponding
positions.
J.3 Basic set up settings
To access the “Basic Setting Menu“ , you must insert a
password.
1. Press simultaneously buttons “7“ and “8“ (or “–“ and “–“ ,
depending on the model) for two seconds until the pass-
word menu activates.
2. The default factory password is “1111“. Press the corre-
sponding buttons to insert the password.
NOTE!
Only the Store Manager can access to the
Basic settings.
If you want to change the password see CHANGE PASS-
WORD table in J.5 Advanced settings paragraph.
J.4 Basic settings
UPLOAD / DOWNLOAD APPLIANCE AND PROGRAM
SETTING INTO / FROM USB KEY
1 2
3
1
4
5 6
1
2