Electrohome VistaGRAPHX 2500 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 101

background image

MAINTENANCE

VistaGRAPHX 2500 User's Manual

4-2

Do not operate the Xenon lamp for more than 1000 hours; risk of the lamp
shattering increases as a result of changes in the quartz glass. Also, operation
beyond 1000 hours significantly reduces output brightness.

WARNING

Never attempt to remove the lamp directly after use. The

lamp is under great pressure when hot and may explode,

causing personal injury and/or property damage. Allow to

cool completely and handle by the plastic housing only.

The arc lamp operates at a very high temperature and
pressure. Failure to allow the lamp to sufficiently cool prior
to handling could result in an explosion causing personal
injury and/or property damage. After turning the projector off
it is important that you wait at least five minutes before
unplugging it. This provides enough time for the internal lamp cooling fans to
cool the lamp and to automatically shut off. Cool completely before handling.

Replace the rear filter every 1000 hours or sooner. If this filter is not replaced,
air flow may become restricted and cause the projector to overheat.

See 4.4, Replacing the Lamp and Filter for the complete replacement
procedure.

WARNING

Only use filters supplied by Electrohome.

Only use attachments or accessories recommended by Electrohome. Use of
others may result in the risk of fire, shock or personal injury.

WARNING

Use only the special notched AC power cord. Do not attempt

operation if the AC supply is not within the specified voltage

and power range.

Do not allow anything to rest on the power cord. Locate the projector where the
cord cannot be abused by persons walking on it or objects rolling over it.

Operate the projector at the specified voltage. Do not overload power outlets and
extension cords as this can result in fire or shock hazards.

The projector is equipped with a three wire plug having a third (grounding) pin.
This is a safety feature. If you are unable to insert the plug into the outlet,
contact an electrician to have the outlet replaced. Do not defeat the safety
purpose of the grounding-type plug.

Before unplugging the power cord, make sure the internal
lamp cooling fans have shut off. The fans automatically shut
off when the projector has adequately cooled down.

Slots and openings in the projector provide ventilation. To
ensure reliable operation of the projector and to prevent overheating, these
openings must never be blocked or covered. The projector should never be

Lamp and Filter

'

Replacement

Power Cord

'

and Attachments

Ventilation

«
...
58
59
60
61
62
...
»

Содержание VistaGRAPHX 2500






































































































Отзывы:

Нет отзывов

Похожие инструкции для VistaGRAPHX 2500

Бренд: Acer Страницы: 3

Бренд: Acer Страницы: 2

Бренд: Canon Страницы: 7

Бренд: Canon Страницы: 10

Бренд: Canon Страницы: 6

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 44

Бренд: Canon Страницы: 63

7215 - LV XGA LCD Projector

Бренд: Canon Страницы: 8

Бренд: Canon Страницы: 18

Бренд: Canon Страницы: 6

Бренд: Avermedia Страницы: 58

Бренд: Isotek Страницы: 2

DIGITAL DLP EP7155

Бренд: Optoma Страницы: 2

Бренд: Leonics Страницы: 21

Бренд: Vidikron Страницы: 52

Бренд: Sim2 Страницы: 35

Ruby the rabbit

Бренд: ZAZU Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды