Adjusting the splay angles
Use the report from LAPS 3 to set the angles to build the array. The angle between boxes is
set on the box above. If using compression, the unused quick-release pins should be placed in
the PIN PARK holes. If using a fixed hang, lift the bottom rear of each successive box starting
from the bottom until it hits the stop at the selected angle.
Notice!
Use of a separate cable pick to support the weight of cabling is recommended, especially on
very tall arrays.
Cable weight can change the aiming angle of an array.
To set the splay angle, do the following:
1.
Insert an attached quick-release pin in the correct ANGLE SELECT hole.
2.
Repeat step 1 on the opposite side.
Verify both sides are identical.
3.
Single pin compression method place the second pin in PIN PARK.
OR
Double pin compress the boxes until the rear link bars contact the angle select pin.
Insert the other attached quick-release pins into the corresponding holes in the lower
black ANGLE LOCK section.
For example: 0.5°, 1.5°, EVEN numbered or ODD numbered degrees.
4.
Connect the speaker cables to the input panels.
For more information, see Setting rear link angles, page 17.
For single pin compression method add a pull up assembly to X12TE-GRID only
These instructions apply only to the X12TE-GRID and using the second spreader bar with the
X12PU-BGK to pull-up to the grid. If you are using the X12TC-GRID, skip this section and
continue to the next section.
To add the pull-up assembly to the X12TE-GRID, do the following:
1.
Attach the pull-up link bars to the rear of the X12TE-GRID.
2.
Attach the spreader bar to the pull-up link bars on the top grid.
3.
Attach a 5/8-inch shackle(s) to the pick point on the spreader bar(s).
Ensure the shackle is rated for overhead lifting.
4.
Attach the chain hook from the pull-up hoist to the shackle.
For more information, see X12PU-BGK pull-up kit, page 28.
en
39
Electro-Voice
Installation Manual
2015.04 | 02 | F.01U.310.953
Содержание X1-212/90
Страница 2: ......
Страница 63: ...Notes 12 en 63 Electro Voice Installation Manual 2015 04 02 F 01U 310 953...