To install the X12TE-GRID, do the following:
1.
Attach front link bars (A) to the sidearms.
Consult LAPS 3 for the A, B, or C position of the front link bar for the particular array being
flown.
2.
Insert the attached quick-release pins (B).
Verify all quick-release pins are inserted completely through the sidearm and securely locked
in position.
3.
Attach rear link bars (C) to the sidearms.
Consult LAPS 3 for the rear link bars position corresponding to the A, B, or C position of the
front link bar for the particular array being flown.
4.
Insert the attached quick-release pins (D).
Verify all quick-release pins are inserted completely through the sidearm and securely locked
in position.
5.
Pull and twist two (2) captive twist lock pins (E).
Two (2) captive twist lock pins are locked in the retracted (open) position.
6.
Guide one (1) sidearm (F) into the rigging tubes until it is fully seated in the V-blocks.
Keep a good grip on the sidearm until both pins are completely engaged through the rigging.
en
25
Electro-Voice
Installation Manual
2015.04 | 02 | F.01U.310.953
Содержание X1-212/90
Страница 2: ......
Страница 63: ...Notes 12 en 63 Electro Voice Installation Manual 2015 04 02 F 01U 310 953...