manualshive.com logo in svg

Electro-Voice X1-212/90, Руководство по установке

Поделиться
Скачать
Electro-Voice X1-212/90 Скачать руководство пользователя страница 46

4.

Verify the V-blocks are unobstructed and clear.

5.

Position the empty dolly under the array.

6.

Ensure grilles are facing out.

7.

Lower the array until the link bars engage the V-blocks on the dolly.
Guide the array to land the link bars onto the dolly rails.

8.

Insert the four (4) dolly pins (C) to lock the enclosures onto the dolly.
Verify pin is thoroughly pushed in and thorough both sides of the rail.

9.

Pull and twist the four (4) captive twist lock pins (D).
All four (4) captive twist lock pins are in the unlock position.

10. Lift the column of enclosures (E).

A single column of three (3) elements is on the dolly.

11. Rotate the dolly.
12. Repeat step 2 ensuring the elements are set to 0° position.

Verify the front link bars are extended and locked and rear link bars of the bottom element
are set and locked at 4° (see Notice regarding the Dolly Wheel).

X-LINE ADVANCE Systems

  

2015.04 | 02 | F.01U.310.953

Installation Manual

Electro-Voice

Содержание X1-212/90

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды