Electro-Voice X1-212/90, Руководство по установке

Страница: 47 / 64

13. Repeat steps 6-8 on this column (G).
14. Insert the four (4) dolly pins to lock the enclosures onto the dolly.
Verify pin is thoroughly pushed in and thorough both sides of the rail.
Removing the grid
!
Caution!
The extended grid sidearms are heavy and likely to tip if not secured, potentially causing
damage and/or personal injury if one (1) should fail.
Always maintain a good grip on the sidearm until both twist-lock pins are fully engaged.
1. Remove the 5/8-inch shackle from the spreader bar(s).
2. Lift hoist motor to a safe height.
3. Remove spreader bar.
4. Pull and twist the four (4) captive twist lock pins.
All four (4) captive twist lock pins are in the unlock position.
5. Remove the grid sidearms.
Transporting X1 or X2 loudspeakers
The loudspeaker dolly can be used for long-range transport.
To prepare loudspeakers for transport, do the following:
1.
Ensure the scribble strip is facing out and the carpet is towards the grilles.
2. Insert a dolly side panel into the dolly base (A) to cover the grilles.
en 47
Electro-Voice Installation Manual 2015.04 | 02 | F.01U.310.953