7.
Twist the two (2) captive twist lock pins (G).
Two (2) captive twist lock pins are unlocked in the engaged (Closed) position.
8.
Repeat steps 6-8 on the opposite side of the enclosure.
The second sidearm is attached to the loudspeaker.
9.
Verify the spreader bar is correctly oriented for the model of loudspeaker (X1 or X2)
being rigged.
Both spreader bars must face the same way with their pick point holes aligned.
10. Attach a single spreader bar (H) to the two (2) sidearms at the hole position determined
by LAPS 3.
11. If using two (2) motors and two (2) spreader bars, attach one (1) spreader bar (H) at
hole #1 and one (1) spreader bar (I) at hole #33.
12. Attach a 5/8-inch shackle to the hole labeled PICK HERE on the spreader bar(s).
Ensure the shackle is rated for overhead lifting.
13. Attach the lifting cable/chain(s) to the shackle(s).
14. Verify all hooks, pins, shackles, and other associated rigging components are properly
positioned and secure before lifting the array.
X-LINE ADVANCE Systems
2015.04 | 02 | F.01U.310.953
Installation Manual
Electro-Voice
Содержание X1-212/90
Страница 2: ......
Страница 63: ...Notes 12 en 63 Electro Voice Installation Manual 2015 04 02 F 01U 310 953...