manualshive.com logo in svg

Electro-Voice X1-212/90, Руководство по установке

Поделиться
Скачать
Electro-Voice X1-212/90 Скачать руководство пользователя страница 18

▪

DOLLY WHEEL (the 4º hole) is used to secure the bottom box of a stack to a dolly.

4.

ANGLE LOCK (in the bottom black section) is used to lock the rear link bar for fixed-
pinned angles. Except for a 0º angle, this section is not used for rear-rigging compression
pull up.

▪

0.5° and 1.5° are used to lock those two (2) angles.

▪

ODD° is used to lock the odd number angles.

▪

EVEN° is used to lock the even number angles and the 0º angle.

 
Single pin and double pin
Single pin compression method is used when a pull-up to the grid is employed to pull the rear
rigging together into compression. Double pin is used to set the rear rigging at fixed angles.
Ensure both sides of the loudspeaker are pinned identically.
 
To single pin or double pin, do the following:
1.

Release the quick-release pin from RETRACT LOCK hole.

2.

Lower rear link bar.

X-LINE ADVANCE Systems

  

2015.04 | 02 | F.01U.310.953

Installation Manual

Electro-Voice

Содержание X1-212/90

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды