Electro-Voice X1-212/90, Руководство по установке

Страница: 40 / 64

Adding additional elements to the array
1.
Verify all hooks, pins, shackles, and other associated rigging components are properly
positioned and secure before lifting the array.
2. Lift the first column high enough to allow the next column on the dolly to be positioned
below it.
3. Pull the four (4) captive twist lock pins (A) on the top enclosure of the next column.
All four (4) captive twist lock pins are in the unlock (Open) position.
4. Lower the suspended column (B) guiding the front link bars into the front V-blocks of the
waiting column.
Continue lowering until the rear link bars have also seated into the rear V-blocks.
5. Twist the four (4) captive twist lock pins.
Four (4) captive twist lock pins are unlocked in the engaged (Closed) position.
6. Release the four (4) dolly pins (C) on the dolly.
All four (4) dolly lock pins are released and hanging from the dolly.
7. Repeat steps 1-6 to add additional columns to the array.
For more information, see Setting rear link angles, page 17.
If you are using the X12TE-GRID to pull-up to the grid, continue to X12TE-GRID using X12PU-
BGK to pull-up to grid, page 43.
X-LINE ADVANCE Systems
2015.04 | 02 | F.01U.310.953 Installation Manual Electro-Voice